- Believia Finger Pulse Oximeter POM02
- A new non-invasive medical device can measure the patient’s SpO₂ And pulse rate with the finger.
- Maintenance and Storage:
- Clean the surface of the fingertip oximeter before it is used in diagnosis for patients
- Remove the batteries inside the battery cassette if the oximeter will not be operated for a long time
- It is best to preserve the product in a place where the ambient temperature is 10~40°C and humidity is 10% ~ 80%
- It is best to store the product in a place where the ambient temperature is -20 ~ 70 °C and humidity is <93%
- It is recommended that the product should be kept in a dry environment anytime
- A wet ambient might affect its lifetime and even damage the product
- Please follow the law of the local government to deal with a used battery
- Measurement principle
The operation principle of the instrument is Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning and Recording Technology so that two beams of different wavelengths of light (660nm glow and 940nm near-infrared light) can be focused onto a human nail tip through perspective clamp finger-type sensor. Then measured signal can be obtained by a photosensitive element, information acquired through which will be shown on two groups of LEDs through the process in electronic circuits and microprocessors. - Guidance and manufacturer’s declaration of electromagnetic emission.
Emission test: Compliance: Electromagnetic environment guidance.
RF emissions CISPR 11: Group 1:
The Pulse Oximeter uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment.
RF emission CISPR 11: Class B:
The Pulse Oximeter is suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes.
You may add any content here from XStore Control Panel->Sales booster->Request a quote->Ask a question notification
At sem a enim eu vulputate nullam convallis Iaculis vitae odio faucibus adipiscing urna.
